Outback F6-3.0L (2003)
5. For adjustment of upper and lower ends of center pillar, loosen adjusting nut (A) of B-channel (B).
6. Adjust so that upper and lower ends of center pillar are the same size.
7. For glass stroke adjustment, close door, raise glass until positional relationship between glass and weatherstrip becomes as shown. And secure the
glass so that upper stopper lightly touches the glass holder.
8. After stabilizer adjustment, carry out glass crimp adjustment. First, visually ensure positional relationship between retainer & molding and glass of
the roof side, and then begin with rear sash adjustment. Adjust two adjusting bolts alternately step by step to obtain dimensions shown
