Outback L.L.Bean Edition AWD F6-3.0L (2002)
Trunk / Liftgate Handle: Service and Repair
Rear Gate Outer Handle
REMOVAL
1. Remove the rear gate lower trim. <Ref. to REMOVAL, Rear Gate Trim.>
2. Remove the rear gate latch rod.
3. Remove the nut holding the rear gate outer handle, and then remove the rear gate outer handle.
INSTALLATION
Install in the reverse order of removal.
NOTE: Make sure the outer handle works properly after installation.
INSPECTION
1. Inspect the rod for deformation.
2. Make sure the lever and rod move smoothly.