Tribeca F6-3.6L (2008)
12. Disconnect the fuel hoses from the fuel pipe.
1. Disconnect the connector of fuel pipe by pushing the ST in the direction of arrow.
ST 42099AE000 QUICK CONNECTOR RELEASE
2. Remove the clip, and disconnect the evaporation hose from the pipe.
CAUTION:
-
Be careful not to spill fuel.
-
Catch the fuel from hoses using a container or cloth.
13. Remove the fuel pipe protector LH.
14. Remove the engine harness from the fuel injector pipe LH.
15. Disconnect the connectors of the oil temperature sensor, engine coolant temperature sensor and intake oil flow control solenoid valve LH.
16. Remove the bolts which hold fuel injector pipe LH to cylinder head.
