Aerio L4-2.3L (2006)
2) Apply engine oil to oil seal lip, then install timing chain cover (1). Tighten bolts and nut to specified torque.
NOTE: Before installing timing chain cover, check that pin is securely fitted.
Tightening torque
Timing chain cover bolts and nut (a): 11 Nm (1.1 kgf-cm, 8.0 ft. lbs.)
3) Install generator belt idler pulley (1). Tighten nut to specified torque.
Tightening torque
Generator belt idler pulley nut (a): 45 Nm (4.5 kgf-cm, 33.0 ft. lbs.)
4) Install generator belt tensioner (2). Tighten bolts to specified torque.
Tightening torque
Generator belt tensioner bolts (b): 25 Nm (2.5 kgf-cm, 18.5 ft. lbs.)
5) Install water pump pulley (3).
