Aerio L4-2.3L (2006)
(special tool), and connect adapter cable (B) to passenger air bag (inflator) module.
c. For side air bag (inflator) module Verify that side air bag (inflator) module is firmly and properly secured on deployment fixture (special tool),
and connect adapter cable (B) to side air bag (inflator) module.
d. For seat belt pretensioner:
i.
Connect adapter cable (C) to seat belt pretensioner.
ii. Pile 2 wheel-installed tires (2) on top of tire with seat belt pretensioner (3), and tie them with wire harness (4) as shown.
Wire harness specification
Stripped wire harness section 1.25 sq.mm (0.0019 sq.in) or more (Stripped wire harness diameter 1.25 mm (0.05 in.) or more)
NOTE: Wind wire harness around at least 2 times.
iii. Drape blanket (5) over those tires.
11. Connect adapter cable (B) or (C) to deployment harness (A) connector and lock connectors with lock slider.