Aerio L4-2.3L (2006)
11. Connect adapter cable (B) or (C) to deployment harness (A) connector and lock connectors with lock lever.
12. Notify all people in immediate area that you intend to deploy / activate air bag (inflator) module or seat belt pretensioner.
NOTE:
-
When air bag (inflator) module deploys and seat belt pretensioner activates, rapid gas expansion will create substantial report. Wear suitable
ear protection. Notify all people in immediate area that you intend to deploy air bag (inflator) module or activate seat belt pretensioner and
suitable ear protection should be worn.
-
When driver air bag (inflator) module deploys, driver air bag (inflator) module may jump about 30 cm (1 ft) vertically. This is normal reaction
to force of rapid gas expansion inside of drive air bag (inflator) module.
-
After air bag (inflator) module has been deployed, surface of air bag (inflator) may contain powdery residue. This powder consists primarily of
cornstarch (used to lubricate bag (inflator) as it inflates) and byproducts of chemical reaction.
WARNING:
-
Do not place deployed air bag (inflator) module and activated seat belt pretensioner near any flammable objects.
-
Do not apply water, oil, etc. to deployed air bag (inflator) module and activated seat belt pretensioner.
-
Wait for about 30 minutes before touching any metal surface of air bag (inflater) module or seat belt pretensioner module.
Disregarding these precautions may cause fire or personal injury. Failure to follow procedures may result in fire or personal injury.
