Aerio L4-2.3L (2006)
24. Temporarily store undeployed air bag (inflator) module or unactivated seat belt pretensioner referring to Precautions on Service and Diagnosis of
Air Bag System:Except Advanced Air Bag or Precautions on Service and Diagnosis of Seat Belt for details.
25. Contact your local distributor for further assistance.
Deployment / Activation Inside of Vehicle
When the vehicle will be destroyed, or salvaged for component parts, deploy the air bag modules and/or activate seat belt pretensioners installed on
vehicle.
1. Turn ignition switch to LOCK position, remove key and put on safety glasses.
2. Remove all loose objects from front seats and instrument panel.
3. Disconnect air bag (inflator) module or seat belt pretensioner connector as follows.
a. For driver air bag (inflator) module Disconnect contact coil connector (1) located near base of steering column.
b. For passenger air bag (inflator) module Remove glove box from instrument panel and disconnect passenger air bag (inflator) module connector
(2).
c. For side air bag (inflator) module Disconnect side air bag (inflator) module connectors (3) under front seat cushion.
d. For seat belt pretensioner Remove both side (driver and passenger side) center pillar lower trims and disconnect seat belt pretensioner
connectors (3).
