Aerio L4-2.3L (2006)
Impact Sensor: Testing and Inspection
Without Advanced Air Bag
Side Sensor Inspection
CAUTION:
-
Never disassemble side sensor.
-
Sensor should be replaced when it was dropped from a height of 90 cm (3 ft) or more.
-
Check sensor (1) for dents, crack, deformation.
-
Check sensor connector (sensor side and harness side), lock mechanism or sensor lead wire for damage, crack, scorching or melting.
-
Check connector terminals for bent, corrosion or rust.
If any faulty condition is found in above checks, replace.
