Aerio L4-2.3L (2006)
6) To facilitate toe adjustment after reinstallation, put match marks (4) on washer (3) and on suspension frame (2) (right and left).
7) Remove control rod (No.2) (1).
8) Remove control rod (No.1).
9) Remove left drive shaft from differential and knuckle, and disconnect right drive shaft from differential.
10) To facilitate reinstallation, put match marks (1) on No.2 propeller shaft flange and differential flange. Disconnect No.2 propeller shaft form
differential.
11) Remove differential, differential mounting and mounting bracket from suspension frame.
12) Remove suspension frame from vehicle body.
