Aerio L4-2.3L (2006)
^
Using special tool, drive wheel hub (1) into steering knuckle (2) and then install steering knuckle (2) to strut and lower ball joint.
Special Tool
(A): 09913-75520
^
Install ball joint bolt (1) and nut (2) from the direction as shown. Tighten suspension arm ball joint nut (2) to specified torque.
Tightening torque
Suspension arm ball joint nut (a): 60 Nm (6.0 kgf-cm, 43.5 ft. lbs.)
^
Tighten strut bracket nuts (3) to specified torque.
Tightening torque
Strut bracket bolt (b): 105 Nm (10.5 kgf-cm, 76.0 ft. lbs.)
