Equator 2WD V6-4.0L (2009)
1. Park the vehicle in a warm, dry area.
Remove any remaining wrap guard material from the vehicle.
2. Using a heat gun rated between 1200 and 1400 watts, holding the tool no closer than 12 inches from the paint surface, begin applying heat.
3. Apply heat for no more than 2-4 minute intervals, moving the focus of the hot air around the discolored area to ensure that the surface temperature
rises and cools evenly. Never allow the temperature to exceed 190°F. The most effective range is 170-190°F.
Note:
It is highly recommended that an accurate temperature monitoring device is used to ensure that the painted surface does not get too hot.
4. Allow the area to cool before re-applying heat.
5. If it is necessary to use a heat gun on a large area, please divide the area into smaller sections of 12-15 inches in diameter. And once you have
completed a section, move to another that is not adjacent to the portion left cooling, or allow the area to cool completely before continuing on the
next section.
Heat lamp method (recommended for large areas in excess of 12-15 inches in diameter.)
1. Park the vehicle in a warm, dry area.
Remove any remaining wrap guard material from the vehicle, Choose an area that is close enough that the process can be easily monitored.
2. Using a heat lamp, position the vehicle and the lamp(s) in a position that the surface can be heated evenly, and the distance is great enough that there
is little risk of the surface getting too hot, and begin applying heat.
3. Apply heat for no more than 2-4 minute intervals. Ensure that the surface temperature rises and cools evenly. Never allow the temperature to exceed
190°F. The most effective range is 170-190°F.
Note:
It is highly recommended that an accurate temperature monitoring device is used to ensure that the painted surface does not get too hot.
4. Allow the area to cool before re-applying heat.
Sunlight method (recommended for all affected vehicles wherever there is warm, direct sunlight available)
1. Park the vehicle in a warm, dry area. Remove any remaining wrap guard material from the vehicle.
2. Position the vehicle so the affected area is exposed to direct sunlight. Let the vehicle soak in the warmth from the sun until the discoloration subsides.
Disclaimer
