Esteem GLX Wagon Plus L4-1.8L (1999)
Standard resistance: 11 - 15 ohms at 20° C, 68° F
-
Throttle pressure control solenoid.
Check resistance between each terminals.
Standard resistance: 3 - 5 ohms at 20° C, 68° F
Operation Check
Shift solenoid valves No. 1 and No.2.
1. Apply oiler to solenoid valve and give compression by hands and then check to be sure that transmission fluid from oiler does not come out of
holes in solenoid valve when battery voltage is not conducted.
2. Under the same conditions as above, conduct battery voltage and then make sure that fluid comes out with vigor.
If check result is not as described, replace shift solenoid valve.
TCC Solenoid Valve
1. Apply oiler to solenoid valve and give compression by hands and then check to be sure that transmission fluid from oiler does not come out of
holes in solenoid valve when battery voltage is conducted.
2. Under the same conditions as above, release battery voltage and then make sure that fluid comes out with vigor. If check result is not as described,
replace shift solenoid valve.
INSTALLATION
1. Install shift solenoid No. 1, shift solenoid No.2 and TCC solenoid in that order.
Tightening Torque
(a): 6.8 Nm (0.68 kg.m, 4.9 ft. lbs.)
