Grand Vitara 2WD L4-2.4L (2009)
Condenser HVAC: Testing and Inspection
A/C Condenser Assembly On-Vehicle Inspection
CAUTION: Be careful not to damage condenser fins. If condenser fin is bent, straighten it by using a screwdriver or pair of pliers. If any
leakage is found from fitting or tube, repair or replace condenser.
NOTE: Clogged condenser fins should be washed with water, and should be dried with compressed air.
Check the followings.
-
Clog of condenser fins.
If any clog is found, condenser fins should be washed with water and should be dried with compressed air.
-
Condenser fins for leakage and breakage If any defects are found, repair or replace condenser.
-
Condenser fittings for leakage. If any defects are found, repair or replace condenser.