Grand Vitara LTD 2WD V6-2.5L (2001)
6. Remove rear bushing by using hydraulic press (1) and special tools, pull out bushing.
Special tool
(A): 09951-46020
(D): 09913-80112
(E): 09925-58210
INSTALLATION
1. Press-fit front bushing until its flange contacts housing edge of control arm, use special tools.
Special tool
(C): 09951-16060
(F): 09913-85210
NOTE: When press-fitting bushing, compounding oil or soap water applied to inside of control arm housing will facilitate work.
