Kizashi AWD L4-2.4L (2010)
Camshaft: Service and Repair
Camshaft and Tappet Inspection
Camshaft and Tappet Inspection
Reference: Camshaft and Tappet Removal and Installation
Cam Height
Use a micrometer to measure cam height "a". Replace camshaft if measured height is out of standard values.
Cam Height (IN)
Standard: 47.620 - 47.780 mm (1.8748 - 1.8811 in.)
Limit: 47.490 mm (1.8696 in.)
Cam Height (EX)
Standard: 46.543 - 46.703 mm (1.8324 - 1.8387 in.)
Limit: 46.420 mm (1.8275 in.)
Camshaft Runout
Set camshaft between two "V" blocks and measure its runout using a dial gauge. Replace camshaft if measured camshaft runout exceeds limit.
CAUTION:
Do not attempt to fix camshaft runout for the purpose of reuse.
Camshaft runout limit
0.015 mm (0.00059 in.)