Kizashi AWD L4-2.4L (2010)
Engine Oil Pressure: Testing and Inspection
Oil Pressure Check
NOTE:
Before checking oil pressure, check the following points:
^
Oil level in oil pan
If oil level is too low, add oil up to full level mark on oil level gauge.
^
Oil quality
If oil is discolored or deteriorated, change it.
^
Oil leaks
If leak is found, repair it.
1) For M/T model, place gear shift lever in "Neutral" and apply parking brake.
For CVT model, place select lever in "P" and apply parking brake.
2) Disconnect OCV connector.
3) Remove engine cover.
4) Disconnect oil pressure switch connector (1).
5) Remove oil pressure switch (2) from timing chain cover.
CAUTION:
Cover the drive belt with shop cloth and avoid oil drops to belt while removing oil pressure switch.
6) Install special tools to threaded hole where oil pressure switch was removed.
Special Tool