Kizashi AWD L4-2.4L (2010)
Throttle Position (TP) Sensor Performance Check
1. Remove air cleaner outlet hose with ignition mode of keyless push start system in "OFF".
2. Disconnect connector from electric throttle body assembly.
3. Check TP sensor (main and sub) output voltage as follows.
If faulty condition is found, replace throttle body.
a. Connect 3 new 1.5 V batteries (1) in series and check that total voltage is 4.5 - 5.0 V.
b. Connect voltmeter (2) and batteries to TP sensor as shown in figure.
