suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Removal and Replacement|Page 3458 > < Removal and Replacement|Page 3456
Page 16
background image

Grease amount (wheel side)
: 60 - 80 g (2.12 - 2.82 oz)

^

Install new wheel side boot big band as follows.

1) Place wheel side boot big band (1) onto boot putting band outer end (2) against forward rotation (3) as shown in figure.

CAUTION:

^

Be sure to use new boot bands.

^

Do not squeeze or distort boot when fastening it with bands. Distorted boot caused by squeezing air may reduce its durability. 

2) Fasten boot band (2) by drawing hooks [a] with special tool and engage hooks (1) as shown in figure.

Special Tool

Removal and Replacement|Page 3458 > < Removal and Replacement|Page 3456