Kizashi AWD L4-2.4L (2010)
Seals and Gaskets: Service and Repair
Differential Side Oil Seal Replacement
1) Hoist vehicle and drain transaxle oil.
2) Remove the following parts.
^
Front Drive Shaft:
^
Drive intermediate shaft:
3) Remove oil seal (1) using special tool.
Special Tool
(A): 09913-50121
4) Install new oil seal (1) to specified position using special tool.
NOTE:
^
When installing oil seal, face its spring side inward.
^
Install oil seal exactly to the specified height.
Special Tool
(A): 09944-88220
(B): 09944-66010
(C): 09924-74510
Distance between case and left oil seal
"a": 1.0 - 2.0 mm (0.04 - 0.07 in.)
Distance between case and right oil seal
