Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
Malfunction Indicator Lamp: Component Tests and General Diagnostics
1) Turn ON ignition switch (but the engine at stop) and check that MIL lights. If MIL does not light up, go to "Diagnostic Flow Chart A-1" for
troubleshooting.
See: Symptom Related Diagnostic Procedures/A-1 MIL Does Not Illuminate
2) Start engine and check that MIL turns OFF. If MIL remains ON, and no DTC is stored in ECM, go to "Diagnostic Flow Chart A-2" for
troubleshooting.
See: Symptom Related Diagnostic Procedures/A-2 MIL Remains "ON" After Engine Start
