suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Brakes - Rear Squeal|Page 1907 > < Brakes - Rear Squeal While Applied|Page 1898
Page 1
background image

Brake Shoe: All Technical Service Bulletins
Brakes - Rear Squeal

TSB No. TS 5-02 11193(R)
Section Title: Steering, Brakes, and Suspension

Division: Automotive
Category: Technical

SUBJECT:
REAR BRAKE SQUEAL

MODEL: ALL
YEAR: 1989 - 1992

CONDITION:
Rear brake squeal when stopping.

CAUSE:
Material of brake lining.

CORRECTION:
To reduce rear brake squeal when stopping, apply BG Stop Squeal # 860 to rear brake shoes.

REVISION:
Change in repair procedures.

This bulletin is to inform you of the approval by ASMC of the BG Products "Stop Squeal # 860" compound.

If you encounter a severe rear brake squeal when braking, treat the rear brake shoes with the BG Products "Stop Squeal # 860", according to the product
directions. Each one (1) ounce bottle will treat two (2) Sidekicks.

Resurface or replace the brake drums only as necessary. Please refer to section 5 of the Sidekick Service Manual for further servicing procedures.

To obtain "Stop Squeal # 860", contact your local BG Products distributor from the list, or call (316) 265-2686 for information.

I.

CHECKING THE BRAKE DRUMS

A.

Visually inspect the rear drums for damage such as cracks, scoring, and deep grooves.

B.

Measure the drum diameter in three (3) or more points around the brake drum to confirm that the inside diameter does not exceed the
service limits and that the drum is not out of round.

C.

Measure the drum for taper by measuring the inside, middle, and outside of the brake shoe contact surface of the drum. Measure at three (3)
or more points around the drum to confirm that the drum is not tapered and within the service limits.

Brakes - Rear Squeal|Page 1907 > < Brakes - Rear Squeal While Applied|Page 1898