Sidekick 4WD L4-1590cc 1.6L SOHC 0 TBI 8V (1990)
Power Steering Pump: Service and Repair
Disassembly and Assembly
Fig. 5 Exploded View Of Power Steering Pump
1.
Remove power steering pump as described under REMOVAL and INSTALLATION.
2.
Using transfer flange lock holder 09930-40113 or equivalent, remove pump pulley.
3.
Remove suction connector bolts, then the pressure switch and flow control assembly, Fig. 5.
4.
Remove pump cover bolts, then the cam ring.
5.
Remove snap ring and pull out rotor. When pulling rotor out of shaft, be careful not to lose vanes.
6.
Remove shaft and oil seal.
7.
Reverse procedure to install. Install rotor to shaft with splined part chamfered side facing cover.