Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
8. Refill rear axle (differential) housing with new specified gear oil.
9. Check that no foreign material is attached to sensor and rotor.
10. Install sensor by reversing removal procedure.
Tightening Torque (a): 21 Nm (15.0 ft. lbs.)
CAUTION: Do not pull wire harness or twist more than necessary when installing rear wheel speed sensor.
11. Check that there is no clearance between sensor and knuckle.
12. Install brake drum and wheel. Refer to Brakes and Traction Control.
