Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
Resistance of EVAP canister purge valve:
28 - 36 Ohms at 20°C (68°F)
If resistance is as specified, proceed to next operation check. If not, replace.
6) Disconnect vacuum hoses from intake manifold and EVAP canister.
7) With coupler disconnected, blow into hose "A". Air should not come out of hose "B".
If not, replace EVAP canister purge valve.
8) Connect 12V battery to solenoid purge valve terminals. In this state, blow hose "A".
Air should come out hose "B".
WARNING:
Do not suck the air through valve. Fuel vapor inside valve is harmful.
If check result is as specified above, check EVAP canister purge valve harness.
If not, replace EVAP canister purge valve.
9) Connect vacuum hoses.
10) Connect EVAP canister purge valve coupler securely.
