Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
12. Install gear shift lever case to transmission without using sealant for functional check.
13. Install shift control lever and check to make sure that it shifts smoothly according to shift pattern as shown in following figure.
NOTE:
-
Apply thread lock cement to control lever locating bolts when replaced.
-
Be sure to apply sealant to mating surface of gear shift lever for its final installation.
"C": Cement 99000-32020
Tightening Torque
(d): 17 Nm (1.7 kg-m, 12.5 ft. lbs.)
