Swift L4-1298cc 1.3L DOHC 3 MFI 16V (1989)
Fig. 54 Standard Bearing Chart
6.
From the number stamped on crank web, Fig. 51 and 52, and the letters stamped on surface of cylinder block, Fig. 53, determine new standard
bearing to be installed to journal, by referring to table, Fig. 54. For example, if number stamped on crank web is 3 and letter stamped on cylinder
block is B, install new standard bearing with a Yellow painted identification mark.
7.
Using gaging plastic, check bearing clearance with new standard bearing selected. If clearance exceeds limits, use next thicker bearing and recheck
clearance.
8.
If replacing crankshaft or cylinder block, select new standard bearings by numbers stamped on new crankshaft or letters stamped on cylinder
surface.
