Swift L4-1298cc 1.3L DOHC 3 MFI 16V (1989)
3. Turn camshaft timing belt pulleys (INTAKE AND EXHAUST) so that punch mark "I" on intake side camshaft timing belt pulley is aligned with
mark on cylinder head cover, and punch mark "E" on exhaust side camshaft timing belt pulley is aligned with mark on cylinder head cover, but
don't turn each pulley beyond the allowable turning range.
NOTE: If pulleys don't stop in place due to counter force of valve spring, hold them in place by using bolts and flanged nuts as shown in image.
4. Check that punch mark on crankshaft timing belt pulley is aligned with arrow mark on oil pump case. if not, align two marks by turning crankshaft
but be careful not to turn it more than its allowable turning range.
