Swift L4-1298cc 1.3L SOHC MFI (1997)
1. Fit special tool (G) into clutch installation boss.
2. Twist special tool until 2 lips on tool fit in slot in mechanical seal housing.
Special Tool
(G): 09990-48230
3. Pull up special tool (G) to remove mechanical seal.
INSTALLATION
1) Install mechanical seal.
1. Coat special tool (H) surface with oil and install it to the shaft.
Special Tool
(H):09990-58240
2. Apply oil to mechanical seal 0-ring and install it over special tool (H). When fitting mechanical seal over the special tool, care should be taken
so as not to confuse its designated direction. The illustration left shows the designated direction.
CAUTION: Do not reuse mechanical seal once removed from compressor.
