Swift L4-1298cc 1.3L SOHC MFI (1997)
7. Install discs,plates and flange in following order.(1)Plate->(2)Disc->(3)Plate->(4)Plate->(5)Disc->(6) Flange
NOTE: If new clutch discs are installed, soak them in automatic transmission fluid for 2 hours or more before assembly.
8. Install clutch plate snap ring.
9. After installing clutch plate snap ring, measure height between snap ring and clutch flange as previously outlined. If height is out of specification
even when new clutch discs and plates are installed, install flange of different thickness. Following two types of clutch flanges are available as
spare parts.
Height "a": 2.49 - 3.06 mm (0.098 - 0.120 inch).
Available clutch flange:
Thickness: 3.00 mm/0.1 18 inch
Thickness: 3.37 mm/0.132 inch
10. Check piston for movement by blowing air through oil hole in drum.
CAUTION: Apply only low pressure air for checking movement. Excessive air pressure may cause damage to spring seat.
