Swift L4-1298cc 1.3L SOHC MFI (1997)
2. Install outer seal (O-ring). Apply transmission fluid to outer seal and fit it to piston. Use new outer seal.
3. Install piston into drum. Be careful so that seals (O-rings) do not get twisted or caught.
4. Install clutch return spring assembly.
5. Install spring seat.
6. Install snap ring. Compress return springs and install spring seal snap ring in groove. Place special tool (clutch spring compressor) on spring seat
and compress springs with press, and then, install snap ring using a screwdriver.
Special Tool (A): 09926-98310 or equivalent.
CAUTION:
^
Check to make sure that snap ring is securely fitted in four projections A of spring seat.
^
Do not compress return spring more than necessary.
