suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Recall - A/T Select Lever Assembly|Page 2184 > < Shift Solenoid Valve Circuit Check Procedure C|Page 2175
Page 1
background image

Technical Service Bulletin # TS3-18

Date: 981007

Recall - A/T Select Lever Assembly

TSB No. TS 3-18 10078
Section Title: Drivetrain

Division: Automotive
Category: Technical

SUBJECT:
SPECIAL SERVICE CAMPAIGN: S7, A/T SELECT LEVER

MODEL:
SWIFT

YEAR:
1997

CONDITION:

The automatic transmission shift lever appears to be in Park position, but can easily be moved from the Park position without the use of the key, the
transmission lever detent button, or depressing the service brake pedal. If the shift lever should come out of Park while the vehicle is parked on a
non-level surface, the vehicle could begin to roll and a crash could occur without prior warning.

CAUSE:

The shift lever park lock mechanism can become bent or distorted.

CORRECTION:

Replace the complete shift lever assembly with a new modified assembly as described in this bulletin.

Note:

For claim information see Service Campaign Bulletin # SC-12 

AFFECTED VEHICLES

All 1997 Swifts with automatic transmissions built in CAMI up to and including the following Vehicle Identification Numbers:

2S2AB21H_V6600001 to 2S2AB21H_V6603485

Removal and Installation Procedure

REMOVAL PROCEDURE

1.

Remove the six center console screws.

2.

Remove the center console.

3.

Unsnap the shifter indicator plate. While moving up towards the selector knob, disconnect the indicator light.

4.

Disconnect the shift selector electrical connector.

5.

Disconnect the shift select cable and the park lock cable from the shift selector.

Recall - A/T Select Lever Assembly|Page 2184 > < Shift Solenoid Valve Circuit Check Procedure C|Page 2175