Swift GA L4-1298cc 1.3L SOHC MFI (2001)
3. Disassemble parts.
REASSEMBLY
1. Compress spring with special tool (A) until total length becomes about 230 mm (9.06 inch).
Length "a": 230 mm (9.06 inch)
2. Install coil spring seat as shown and mate spring end with stepped part of lower seat.
3. Install bump stopper onto strut rod. For installing direction, refer to figure in DISASSEMBLY.
4. Pull strut rod as far up as possible and use care not to allow it to retract into strut.
