Swift GL L4-1298cc 1.3L SOHC MFI (2000)
Backing Plate: Service and Repair
Vehicles With A Wheel Hub
REMOVAL
1. Perform steps 1) to 4) of brake drum REMOVAL.
2. Remove spindle cap as shown (by hammering lightly at 3 locations around it so as not to deform or cause damage to seating part of cap).
3. Unstake spindle nut and remove spindle nut and washer.
4. Pull wheel hub off by using special tools.
Special Tool
(A): 09943-17911
(B): 09942-15510
5. Perform steps 2) and 3) of brake shoe REMOVAL.
6. Perform steps 2) and 3) of wheel cylinder REMOVAL.
7. Remove cable from brake back plate by squeezing parking brake cable stopper ring.
