Swift GL L4-1298cc 1.3L SOHC MFI (2000)
4. Align keyway in armature plate to shaft.
5. Drive in armature plate by using a pipe whose inner diameter is 8.5 mm (0.335 in.) or more and outer diameter is 19 mm (0.748 in.) or less.
Diameter "a" : 8.5 mm (0.335 in.) or more
Diameter "b" : 19 mm (0.748 in.) or less
6. Adjust clearance, between armature plate and magnet clutch by putting shim on compressor shaft.
Standard clearance "c" : 0.35 - 0.65 mm (0.014 - 0.025 in.)
7. Tighten new armature plate nut as specified below.
Tightening Torque
a: 18 Nm (1.8 kg.m, 13.0 lb.ft)
Special Tool
(A): 09920 - 55810