Swift GL L4-1298cc 1.3L SOHC MFI (2000)
1. Check that none of following faulty conditions exists.
-
Bend, scratch, deformity in SDM bracket
-
Foreign matter or rust on mating surface of SDM bracket with SDM
-
Loosened SDM bracket bolts
NOTE: When retightening, check that bolt thread is tree from corrosion and rust. If any, replace.
2. Install SDM bracket to vehicle.
Tightening Torque:
(a): 5.5 Nm (0.55 kg.m, 4.0 lb.ft)
