SX4 4WD L4-2.0L (2008)
INSTALLATION
Reference: SDM Inspection:Advanced Air Bag
1. Check that none of the following faulty conditions exists.
^
Bend, scratch, deformity in vehicle body where SDM is mounted.
^
Foreign matter or rust on mating surface of vehicle body where SDM is mounted.
2. Install SDM (2) to vehicle.
CAUTION: Ensure that arrow on the SDM is pointing toward the front of the vehicle.
3. Tighten SDM bolts (1) to specified torque.
Tightening torque
SDM bolt (a): 9 Nm (0.9 kg.m, 6.5 lbf.ft)
4. Connect SDM connector (1) to SDM (2) securely.