SX4 4WD L4-2.0L (2008)
Side Air Bag: Service and Repair
Side-Air Bag (Inflator) Module Removal and Installation
Side-Air Bag (Inflator) Module Removal and Installation
WARNING:
^
Never attempt to disassemble or repair the side-air bag (inflator) module. If any abnormality is found, be sure to replace it with new one
as an assembly.
^
Be sure to read Precautions on Service and Diagnosis of Air Bag System:Advanced Air Bag, Precautions on Handling and Storage of Air
Bag System Components:Advanced Air Bag and Precautions on Disposal of Air Bag and Seat Belt Pretensioner:Advanced Air Bag before
starting to work and observe every precaution during work. Neglecting them may result in personal injury or undeployment of the air
bag when necessary.
REMOVAL
1. Disable air bag system. Refer to Disabling Air Bag System:Advanced Air Bag. See: Air Bag(s) Arming and Disarming/Service and
Repair/Disabling Air Bag System/Advanced Air Bag
2. Loosen seat back surface fastener (1) and roll up backside seat back surface.
