Verona L6-2.5L (2005)
Fuel Door Release Cable: Service and Repair
Fuel Filler Door Remote Handle and Cable Removal and Installation
Fuel Filler Door Remote Handle and Cable Removal
1. Open the luggage compartment.
2. Remove the luggage compartment wheelhouse trim panels and the luggage compartment rear trim panel. Refer to Luggage Compartment
Wheelhouse Trim Panel Removal and Luggage Compartment Rear Low Cover Removal.
3. Disconnect the cable from the fuel filler door.
4. Remove the lower B-pillar seat belt bolt and the anchor.
5. Remove the screw and the fuel filler door remote cable handle cover.
6. Remove the screws and the fuel filler door remote cable handle.
7. Disconnect the cable from the handle.
8. Remove the driver's side seat and the rear seats. Refer to Front Bucket Seat Removal, Rear Seat Cushion Removal and Split Rear Seatback
Removal.
9. Remove the left side front and rear rocker panels, the left side kick panel, and the left side lower B-pillar trim panel. Refer to Front Rocker Trim
Panel Removal, Rear Rocker Trim Panel Removal, Kick Panel Removal and Lower B-Pillar Trim Panel Removal.
10. Reposition the floor carpet on the left side of the vehicle.
