Vitara JLS (4Dr) 2WD L4-2.0L (2000)
(B): 09944: 66010
(C): 09924: 74510
^
For 4WD vehicle
^
Apply lithium grease to oil seal lip and into its hollow to fill more than 60% of its vacant space.
"B": Grease 99000-25010
^
Press-fit front drive shaft thrust washer to drive shaft, if it is removed (for vehicle with G16 or J20 engine).
^
Apply grease and install front drive shaft thrust washer with its chamfered side facing to center side (for vehicle with H25 engine).
"A": Grease 99000-25010
^
For 2WD vehicle
Apply water tight sealant to mating surface of knuckle and install knuckle cap to knuckle.
"A": Sealant 99000-31090
^
Tighten control arm ball stud nut. When tightening ball stud nut, use new nut and tighten it to specified torque.
Tightening Torque (a): 60 Nm (6.0 kg-m, 43.5 ft. lbs.)