Vitara JLX (2Dr) 4WD L4-2.0L (2001)
2. Install it by reversing removal procedure.
Tightening torque
Wheel speed sensor bolt clamp (a): 10 Nm (1.0 kg-m, 7.5 ft. lbs.)
Front wheel speed sensor bolt (b): 23 Nm (2.3 kg-m, 17.0 ft. lbs.)
CAUTION:
^
Do not pull wire harness or twist more than necessary when installing front wheel speed sensor.
^
Fit harness grommet to inner fender securely.
3. Check that there is no clearance between sensor and knuckle.
Type 2
OUTPUT VOLTAGE INSPECTION
1. Turn ignition switch to OFF position.
2. Hoist vehicle a little.