4 Runner 2WD L4-2.7L (2TR-FE) (2010)
NG -- CONNECT CONNECTOR
OK -- REPAIR OR REPLACE NO. 4 JUNCTION CONNECTOR
40. CONNECT CONNECTOR
(a) Reconnect the G13 and G14 No. 4 junction connector connectors.
NEXT -- Continue to next step.
41. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NAVIGATION RECEIVER ASSEMBLY)
(a) Disconnect the G20 navigation receiver connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO NAVIGATION RECEIVER ASSEMBLY (CANH,
CANL)
OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY
42. CONNECT CONNECTOR
*1: w/o Navigation System
*2: w/ Navigation System
(a) Reconnect the F60 No. 3*1 junction connector connector.
(b) Reconnect the G13 No. 4*2 junction connector connector.
NEXT -- Continue to next step.
43. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 2 JUNCTION CONNECTOR - NO. 3 OR NO. 4 JUNCTION CONNECTOR)
(a) Disconnect the F59 No. 2 junction connector connector.