4 Runner 2WD L4-2.7L (2TR-FE) (2010)
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (NO. 4 JUNCTION CONNECTOR - NO. 3 JUNCTION
CONNECTOR)
OK -- Continue to next step.
38. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 4 JUNCTION CONNECTOR SIDE)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CONNECT CONNECTOR
OK -- Continue to next step.
39. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 4 JUNCTION CONNECTOR - NAVIGATION RECEIVER ASSEMBLY)
(a) Disconnect the G14 No. 4 junction connector connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance: