4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Removal
FRONT SUSPENSION: FRONT SHOCK ABSORBER: REMOVAL
NOTICE:
Be sure to read the precaution before performing this procedure See: Service Precautions/Suspension Control System (w/ REAS).
HINT
*
Use the same procedure for the RH and LH sides.
*
The procedure listed below is for the LH side.
1. REMOVE FRONT WHEEL
2. REMOVE LOWER FRONT BUMPER COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
4. REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY See: Stabilizer Bar/Service and Repair/Front Stabilizer Bar (w/
KDSS)/Removal
5. REMOVE FRONT STABILIZER END BRACKET (w/ KDSS) See: Stabilizer Bar/Service and Repair/Front Stabilizer Bar (w/ KDSS)/Removal
6. REMOVE FRONT STABILIZER BAR (w/ KDSS) See: Stabilizer Bar/Service and Repair/Front Stabilizer Bar (w/ KDSS)/Removal
7. DISCONNECT FRONT STABILIZER LINK ASSEMBLY LH (w/o KDSS)
(a) Remove the nut and disconnect the stabilizer link from the steering knuckle.