4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
10. Remove oil strainer.
Remove the bolt, 2 nuts, oil strainer and gasket.
11. Remove crankshaft pulley.
(a)
w/ A/C: Remove the 4 bolts, No. 2 and No. 3 crankshaft pulleys.
(b) Using SST Crankshaft Pulley Holding Tool # 09213 - 54015, and Companion Flange Holding Tool # 09330 - 00021 or equivalents, remove
the pulley bolt.
(c)
Remove the crankshaft pulley.
NOTE: If necessary, remove the pulley with SST Puller C Set # 09950 - 50010 (Hanger 150 # 09951 - 05010, Slide Arm # 09952 - 05010,
Center Bolt 100 # O9953 - 05010, Claw No. 2 # 09954 - 05020) or equivalents and crankshaft pulley bolt.
12. Remove timing chain cover.
(a)
Remove the 2 water bypass pipe nuts.
(b) Remove the 2 timing chain cover bolts.