4 Runner 2WD V6-4.0L (1GR-FE) (2006)
d. Apply adhesive.
Adhesive: Part No.08850-00801 or equivalent
1. Cut off the tip of the cartridge nozzle as shown in the illustration.
HINT: After cutting Off the tip, use all adhesive within the time described in the table below.
Tackfree time:
2. Load the sealer gun with the cartridge.
3. Coat the glass with adhesive as shown in the illustration.
Dimension:
e. Install the glass to the body.
1. Hold quarter window assembly in place securely with protective tape or equivalent to the body until the adhesive hardens.