4 Runner 2WD V6-4.0L (1GR-FE) (2006)
b. Using a brush, coat the exposed part of the body on the vehicle side with Primer M
NOTE:
-
Dry the primer coating for 3 minutes or more.
-
Do not coat the adhesive with Primer M.
-
Do not keep any of the opened Primer M for later use.
c. Using a brush or sponge, coat the edge of the glass and the contact surface with Primer G.
HINT: If the area other than the specified is coated by accident, wipe off the primer with a clean shop rag before it dries.
NOTE:
-
Dry the primer coating for 3 minutes or more.
-
Do not keep any of the opened Primer Go for later use.
Dimension: