Avalon V6-3.5L (2GR-FE) (2006)
3. REMOVE REAR EXHAUST PIPE NO.1 SUPPORT BRACKET
a. Remove the 2 bolts and rear support bracket.
4. REMOVE EXHAUST PIPE ASSEMBLY FRONT
a. Remove the 2 nuts from the exhaust pipe front (left bank exhaust manifold side).
b. Remove the 2 bolts from the exhaust pipe front (right bank exhaust manifold side).
c. Remove the 2 nuts and 2 bolts from the exhaust pipe front (exhaust pipe center side). Then remove the exhaust pipe front.
d. Remove the 3 gaskets from the exhaust pipe front.
5. REMOVE EXHAUST PIPE ASSEMBLY CENTER
a. Remove the 4 nuts from the 2 exhaust pipe tails.
b. Disconnect the 2 exhaust pipe supports and remove the exhaust pipe center.
c. Remove the 2 gaskets from the exhaust pipe center.
d. Remove the 2 bolts from the exhaust pipe damper.
6. REMOVE EXHAUST PIPE ASSEMBLY TAIL
a. Disconnect the 5 exhaust pipe supports and remove the 2 exhaust pipe tails.
7. REMOVE EXHAUST TAIL PIPE BAFFLE SUB-ASSEMBLY
a. Using a plastic hammer, tap out the baffles uniformly to re move them from each exhaust pipe tail.
8. INSTALL EXHAUST TAIL PIPE BAFFLE SUB-ASSEMBLY
a. Align the groove on the exhaust tail pipe baffle with the projection on the exhaust pipe tail.
9. INSTALL EXHAUST PIPE ASSEMBLY TAIL
a. Connect the 5 exhaust pipe supports and install the 2 exhaust pipe tails.