Avalon V6-3.5L (2GR-FE) (2006)
/Page-507001.png)
Exhaust Pipe: Service and Repair
EXHAUST PIPE ASSEMBLY (2GR-FE)
COMPONENTS
REPLACEMENT
NOTICE: Check if an old gasket still remains on the pipe. If so, remove it. Also, check if any bolts or nuts are rusted. If so, replace them.
1. REMOVE HEATED OXYGEN SENSOR
a. Disconnect the 2 heated oxygen sensor (bank 1, 2 sensor 2) connectors.
b. Remove the 2 heated oxygen sensors (bank 1, 2 sensor 2).
2. REMOVE FRONT EXHAUST PIPE NO.1 SUPPORT BRACKET
a. Remove the 2 nuts and front support brackets.