Camry L4-2.4L (2AZ-FE) (2005)
/Page-375006.png)
a) Remove the 3 bolts and engine mounting bracket.
29. REMOVE TIMING CHAIN OR BELT COVER SUB-ASSEMBLY
a) Remove the stud bolt for the drive belt tensioner from the cylinder block.
b) Remove the 14 bolts and 2 nuts.
c) Pry out the timing chain cover with a screwdriver.
NOTICE: Be careful not to damage the contact surfaces of the timing chain cover, cylinder block and cylinder head.
30. REMOVE CRANKSHAFT POSITION SENSOR PLATE NO.1
31. REMOVE CHAIN TENSIONER SLIPPER
32. REMOVE CHAIN VIBRATION DAMPER NO.1
33. REMOVE CHAIN SUB-ASSEMBLY
34. REMOVE CRANKSHAFT TIMING GEAR OR SPROCKET
35. REMOVE NO.2 CHAIN SUB-ASSEMBLY
a) Turn the crankshaft counterclockwise by 90°, and align an adjusting hole of the oil pump driven sprocket with the groove of the oil pump.