Camry L4-2.4L (2AZ-FE) (2005)
/Page-375013.png)
e) M/T: Install the engine lateral control rod with the bolt.
Torque: 89 Nm (910 kgf-cm, 66 ft. lbs.)
45. INSTALL OIL PAN SUB-ASSEMBLY
a) Remove any old packing (FIPG) material and be careful not to drop any oil on the contact surface of the cylinder block and oil pan.
b) Apply seal packing in a continuous bead (diameter: 3 to 4 mm (0.12 to 0.16 inch)) as shown in the illustration, and install the oil pan.
Seal packing: Part No. 08826-00080 or equivalent
NOTICE:
^
Remove any oil from the contact surface.
^
Install the oil pan within 3 minutes after applying seal packing.
^
Do not start the engine for at least 2 hours after installing.
c) Install the oil pan with the 12 bolts and 2 nuts.
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
46. INSTALL CHAIN TENSIONER ASSEMBLY NO.1
47. INSTALL CRANKSHAFT POSITION SENSOR
